- Improved the connectability when using RTSP with some of the VMS.
- Improved the connectability when using multicast transmission with some of the VMS.
- Fixed a bug that would not allow the Recorded Video Utility to download certain recorded video files.
- Corrected an issue where the recordings were truncated, when used with specific VMSs.
PRECAUTIONS:
- After completing the firmware upgrade, use the software installer (AdminToolsCertificate.exe) included in this download to install the Admin Tools Certificate. The Admin Tools Certificate is a digital certificate needed for using Admin Viewer and Admin Tools.
Please follow the steps below to install the Admin Tools Certificate.
1) Double-click AdminToolsCertificate.exe.
2) When the [User Account Control] dialog box appears, click [Yes] or [Continue].
3) A dialog box will appear, click [OK].
- After completing the firmware upgrade, you will not be able to use the Proxy Authentication Admin Tools included on the CD-ROM.
- After completing the firmware upgrade, the camera's time settings may have changed. Reset the time on the settings page and reboot the camera.
- The functions provided by completing the upgrade are not listed in the manuals on the included CD-ROM. Download the latest version separately.
SETUP:
- Download the file to any folder.
- Double-click the file to start the decompression program.
- Select any folder, and start decompression (UnZip).
- For further instructions, refer to Readme in the decompressed folder.
ABOUT NETWORK CAMERA FIRMWARE:
Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.
As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.
However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
DOWNLOAD THIS DRIVER (21.8MB)
EmoticonEmoticon